PM> LT>It seems to happen when a caller drops carrier while connected to the
PM> LT>BBS. The modem stays off-hook and the display cycles as if a 300 baud
PM> LT>caller was online, with the display showing a "3" for connect speed.
PM> LT>The modems will stay like this and will not reset until I manually
PM> LT>turn them off and then back on. Any ideas as to what could be causing
PM> LT>this? The setup string I used was AT&F2W1S11=50L0M0&W&W1.
PM>         The modem is getting stuck in an invalid state.  The
PM>         odd thing is that I have yet to have it happen here, 
PM>         so its hard to fix what I can't duplicate.  I do have
PM>         S30=90 set here.  S30 (if all is working correctly) 
PM>         causing the modem to disconnect after a certain period
PM>         without data movement...in this case 15 minutes).
Patrick, i've also had this happen (about 15 times) on my bbs since upgrading 
my supra external to the latest data pump and beta flash. Version 17 was 
better... I just put version 18 on last night...maybe it will be better. I'll 
try the S30 setting also.
Richard
...This copy of ProBoard has been unregistered for 235 days!
---
---------------