From: John Murray 
To: atm{at}shore.net
Reply-To: John Murray 


Morning All,
        That is one of the reasons I came up with the cutter. I think I must
have
tried every method known bar pitchlap moulds. All of them gave me poor
results. The contraption I came up with may take a while to do but at least
it doesn't need to be remade as has happened previously.

Cheers

John Murray
Whyalla
South Australia
Check our web page at http://astronomy.sa86net.com ATM and M-O-M stuff.


>     How do you keep the pitch from clogging up the teeth in the
> hack saw???
> No matter what saw I use
> it's no use. I use a long butcher's knife and press down and tilt
> back and
> forth to channel..
>                                                R.L.J.
> ("atm{at}shore.net")
> >
> >Hi
> >  For less than 12 inches, I use a hack saw and
> >a spray of water. One can rechannel a lap in less
> >than 5 minutes this way. No special tools. I do
> >use a saw that has never been used for anything
> >else to keep from contaminating the lap.
> >Dwight

--- BBBS/NT v4.01 Flag-4