From: Garey Barrell 
Subject: Re: [drakelist] R4C xtal bank bad


Garey Barrell  made an utterence to the drakelist gang
----------------------------------------------------------------------
Yep, R-58.  Marked "value selected in production" and physically located 
on the slide switch linked to the Meter button on the front panel.

73, Garey - K4OAH
Atlanta

Drake C-Line Service Manual
http://hr99.home.mindspring.com/R-4C_Servicez/>



Eric Webner wrote:

> Hello all,
>  
> (I thought that I ought to clarify that I am now referring to the 
> resistor in series with the meter, R58. I didn't say that too clearly 
> in my previous post.)
>  
> "I feel that I've got a good handle on this radio, and thank you for 
> your support. Once I get a 3.3 ohm resistor in there, however, and 
> assuming the meter series resistor no longer sets up an accurate 100 
> ma reading, is there a way to calculate the proper *series meter* 
> resistance, or is it just easier to wire in a pot temporarily to 
> figure out the correct value?"
>  
> 73,
>  
>
----------------------------------------------------------------------
On Behalf of Garey Barrell 
Submissions:        drakelist{at}www.zerobeat.net
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Zerobeat Web Page:  http://www.zerobeat.net
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---