MF>-> in my cps throughput when I have the Line feed directly connected
MF>-> from the Bell line terminal to the Line input socket of the USR
MF>-> Sportster, and the rest of my phone system is connected to the
MF>-> modem's Phone socket; thereby isolating all the noise signals away
MF>-> from the susceptible to interference modem.
MF>So what you're doing is bypassing the phone jack on the wall, and the
MF>phone jack on the modem, and then soldering it to some part of them
MF>modem?
No soldering Mike. Locate where the Bell entrance terminal is;
disconnect the in house connections from it; run a twisted pair
from the Bell entrance terminal to the Telco socket entrance of
the modem; use the existing pair to connect from the Phone socket
of the modem down to the house connections removed from the Bell
entrance terminal.
If you have a USR Sportster (and possibly other then Digitran modems
not heard from as yet) the house wireing that acts as an antenna for
all matter of offending interference signals will no longer be connected
to the modem to offend your cps throughputs.
Ciao, Ack.
---
 * SLMR 2.1a * Lawyers & Hookers....Both hired to get their clients off.
--- PCBoard (R) v15.3 (OS/2) 5
---------------