From: Christoph Maercker 
Subject: Re: URGENT - How to access Novell DOS TCP/IP-Stack?!??!
Date: 2000/01/19
Message-ID: #1/1
Content-Transfer-Encoding: 7bit
References:  
Content-Type: text/plain; charset=us-ascii
Organization: Otto-von-Guericke-Universitaet Magdeburg
MIME-Version: 1.0
Newsgroups: de.comp.sys.novell,fido.ger.novell,fido.novell

Alexander Gonta schrieb:

> Hello Jens,
> My answer to you is simple: If you must
> use a DOS based machine that is running
> a DOS based IPX and IP stack, running
> ODI drivers, then, you are much better
> off getting the newer CLIENT32 stack
> from Novell. It will still work under
> DOS, but create a much smaller conventional
> memory footprint, of only 5k. Thus, you
> are getting the newest and latest stack,
> getting tons of support and documentation,
> and you should have no problem getting help.
>
> Lan Workplace was around for a very
> long time; however, just like DOS,
> it has gone away, along with Wollongong,
> FTPOneNet, and a whole slew of DOS based
> requester software.

BTW: Some of the LAN-Workplace (LWP) Tools like FTP & FINGER are able
to work with the TCPIP.NLM of the Client32. The Telnet Client TNVT220.EXE
from the LWP v4.2 orv 5.x Pack doesn't work with the C32-TCPIP-Stack but
the Telnet Client of LAN WorkGroup (LWG) v5.x works properly!

    With best wishes    Chr. Maercker.