RB>  > RB>  > Does anyone know how to stop my printer from doing a page 
form)
RB> feed > RB>  > under Geoworks2.0(upgraded to 2.1).
RB> 
RB>  > RB> Which printer? Which Printer-Driver? Which settings in Preferences 
-
RB>  > Printer?
RB>  > RB> Which settings in your document (page size...) and in File - Print 
-
RB>  > Options?
RB> 
RB>  > My question was obviously not well phrased. I'll change it to the
RB>  > following.....
RB> 
RB> No, your question was very right (and I'm glad, that also people outside
RB> Germany can read me...)!
RB>  > Where, within the Geoworks system is the option to turn the page feed
RB>  > after printing, on or off?
RB> 
RB> Nowhere. It only has something to do with the page size and so on. 
Therefore I
RB> asked for your settings.
RB> Gruss, Ralf
Hi Ralf,
Okay, first off I use Geoworks under OS/2, and also the spooler under 
os/2. The spooler in Geos is also enabled, and all printing is routed 
through a print buffer.
Since this problem only exists when printing from Geoworks, then I 
must assume that the problem does NOT lie within OS/2 or it's spooler 
or the hardware print buffer. If it did, then the form feed is easily 
turned off using those items.
I use a PanasonicKXP1124, which can run native or IBMx24Proprinter OR 
Elq2500, the epson emulation which is the one I nearly always use.
The geoworks spooler is mentioned in the Geoworks manual but I cannot 
find it.
Unrelated is the fact that when switching between OS/2 windows and 
Geoworks, my mouse looses focus, and will lockup Geoworks. I'm using 
Hercules Dynamite Pro video card 800x600 Tseng et4000 chip.
Say Hi to Helga.
Kevin J.       @X44 @X74  @X44 @XFF          kevin.johnson@encode.com
Lagoon City, Ontario.   Internet    rn.5248@rose.com
---
 þ RoseRdr/2  1.00á P005248
--- QScan/PCB v1.17b / 01-0313
---------------