Hey Benny!

Feb 02 23:30 07, Benny Pedersen wrote to Maurice Kinal:

 BP> like this http://www.soekris.com/ ?

Sort of.  They are using a geode and I am using a 486.  They are using
software I don't bother with.  They have compact flash where mine will have
a 44-pin ide flash disk(s) instead.  Also cut and paste from there says.
"using a MiniPCI type III board and a low-power 3.3V standard PCI
board", where I am using a 5V pc/104 cpu board with pure DC IO (12V
marine battery as the source power wired into a inverter for other things I
might add and for recharging but the server is direct to the battery and
can accept any DC input power from 9-32V).

I prefer my setup to be honest but am thinking of eventually adding
something more beefier cpu-wise into the DC system.  I've seen a S370 based
system that looks like it will fit in well here and have many cpu's that
will work with it but would probably use a VIA C3 800MHz.  That is for the
future.

At the moment I am trying to get the wireless network to behave itself and
may have to ditch the wireless router.  Found some wireless interfaces that
might prove to be the solution to the problem.  Eventually that will also
be pure DC powered.

Life is good,
Maurice

--- Msged/LNX 6.2.0