From: "Russell Jocoy" 
To: bcjawsss24{at}verizon.net, ATM{at}shore.net
Reply-To: "Russell Jocoy" 


>From: "Arthur" 
>Reply-To: "Arthur" 
>To: "ATM{at}shore.net" 
>Subject: ATM Tile tool questions
>Date: Mon, 11 Aug 2003 17:51:10 -0700 (Pacific Daylight Time)
>
>
>Hi all,
>I just made my tile tool using dental stone. I cleaned between the tiles as
>best as I could while it was still soft,but unable to remove every much of
>the dental stone between the tiles.
>  How do I clean between the tiles now that the dental stone has hardened?
>And, how deep should I go?
>Do I clean up the sides just under the tiles as well?
>How should I shape edges on the tiles on the ends?
>Is there anything else that needs to be done prior to me getting down to
>grinding?
>
>
>Thanks much,
>Arthur
>
>


("atm{at}shore.net")

    Art, Relax,  the dental stone will wear as the tiles do. Make sure the
edges of the tiles are not too
sharp. You can grind the tiles with a wetstone, and also groove out the
dental stone between them
with the corner edge of the wetstone. Don't worry it doesn't have to be too
deep. Grind away until
you get the curve in your tool, then go back if needed and regroove. Some
people us a "dremmel"
tool with a small round stone bit which works great for grooves..    Russ
Jocoy

("atm{at}shore.net")

_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail

--- BBBS/NT v4.01 Flag-5