Le 20/08/2019 11:02, ZOT a écrit :
> On a new installation on a old raspberry (the very first version)
> There is no wlan device, even after inserting a usb wifi device.
> Ifconfig shows only eth0 en lo.
> How to create the device?
> Shouldn't it created automatically when the device is inserted?
> Many thanks in advances
>
More informations.
Many thanks
lsusb -v -d 2001:3319
root@raspi:~# lsusb -v -d2001:3319
Bus 001 Device 007: ID 2001:3319 D-Link Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2001 D-Link Corp.
idProduct 0x3319
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n WLAN Adapter
iSerial 3 (error)
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0035
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 802.11n WLAN Adapter
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x000c
bNumDeviceCaps 1
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
root@raspi:~#
----
/var/log/messages:
Aug 21 09:27:54 raspi kernel: [ 307.194765] usb 1-1.3: new high-speed
USB device number 7 using dwc_otg
Aug 21 09:27:54 raspi kernel: [ 307.327814] usb 1-1.3: New USB device
found, idVendor=2001, idProduct=3319, bcdDevice= 2.00
Aug 21 09:27:54 raspi kernel: [ 307.327841] usb 1-1.3: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Aug 21 09:27:54 raspi kernel: [ 307.327855] usb 1-1.3: Product: 802.11n
WLAN Adapter
Aug 21 09:27:54 raspi kernel: [ 307.327865] usb 1-1.3: Manufacturer:
Realtek
Aug 21 09:27:54 raspi mtp-probe: checking bus 1, device 7:
"/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3"
Aug 21 09:27:54 raspi mtp-probe: bus: 1, device: 7 was not an MTP device
Aug 21 09:27:54 raspi mtp-probe: checking bus 1, device 7:
"/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3"
Aug 21 09:27:54 raspi mtp-probe: bus: 1, device: 7 was not an MTP device
root@raspi:~# uname -a
Linux raspi 4.19.58+ #1245 Fri Jul 12 17:20:08 BST 2019 armv6l GNU/Linux
--
Les politiciens sont imprévoyants, les électeurs sans mémoire.
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | FidoUsenet Gateway (3:770/3)
|