Message-ID: 
Newsgroups: AIRGUN.LIST
I know I told that rapid-fire zealot to do it to his plastic-stocked gun,
but since it's sacrilege to me for someone to mess up the nice wood stock,
I don't want any part a that there idea ... Tim can take ALL the credit,
I don't even want to look at the end result! I begged Tim to make a straight
bulk fill adapter like a pump shotgun extension .. but NOoooo ! ld
----------------------------------
Tim Mcmurray wrote:
> I got a bunch of those wood 1077 Crosmans at the shot show this Feb and
> we have been looking at them ever since. It seems everyone thought that
> crosman should offer their guns in wood and when they did nobody showed
> up to purchase them. So as usual innovation is the only method left to
> push them out of here apparently so here is what I came up with. Took a
> look at a customers verticle bulk fed SSP 250 that I just completed and
> it was obvious instantly that the same mod would work for the 1077. So
> The way it works is a fake CO2 is installed in the tube where the
> standard cartridge goes. It has a 1/8 pipe female thread that via a .4"
> hole in the bottom of the rifles tube and thru the stock we mount the
> receiver nut for the 3.5oz tank. The gun gets around four hundred shots
> in this configuration B4 the tank needs a recharge.
> LD came up with a real nifty speedloader idea for the same gun.
--- QScan/PCB v1.19b / 01-0671
---------------