Hello Barry,
 HO> Does the server say your computer is connected? PCI cards can be a
 HO> problem setting up in the new computers IRQ's can be shifted to
 HO> another IRQ Set your bios setup to Manual, not Automatic so the
 HO> IRQ'S do not get shifted
 BB>      Thank you Harry for the tip. Server never sees the pentium.
 BB>      Trace shows nothing from that work station.
 BB>      Mostly, I'm trying to get it to work with a 3c501.
 BB>      I have 3 good ones. It is a simple NIC and works
 BB>      on the other computers, so I have a net.cfg and drivers that I know
 BB>      are ok. I'll try manual irq though.
I have not seen that card, I changed over to a PCi card and that is sitting 
t
IRQ 12 port 2004 on the windows 95 machine
as I have to many devices in the computer
I had run out off IRQ's and had the same problem, the computer could not
find the SCSI card for my CD rom burner
 BB> it to irq5 and put the blaster on i10.
My Bus mouse uses IRQ 5
Regards, Harry
--- Maximus/2 3.01
---------------