* Reply to message originally in area CarbonArea

Hello Benny!

Sun Jan 04 2015, Benny Pedersen wrote to Gert Andersen:

 GA>> So the best way is to recompile the kernel when it has working for 
 GA>> python and is boot by harddisk so it is been done on the harddisk.

It doesn,t worh this way as Python not can be found by the kernel - only way
back is to shift harddisk there have it all working. for 64bit. So out with 1tb
and in with 1.5tb harddisk. Then can 1tb be reinstalled with clean install and
ther 1.5tb can be the main working harrdisk there then have to be worked on for
router etc. setup.

 BP>boot systemresquecd

 BP>zcat /proc/config.gz /mnt/gentoo/usr/src/linux/.config

 BP>chroot to the install harddisk as dokumented in howto install gentoo

 BP>then make the kernel with following genkernel

 BP>genkernel --oldconfig --no-menuconfig all

 BP>then add / update grub2 config with

 BP>grub2-mkconfig -o /boot/grub/grub.cfg

 BP>now you have a local compiled copy of the kernel that booted your 
 BP>computer from the iso file

 BP>this can be used with ANY new kernel version, dont make changes to OLD 
 BP>kernel config, if you need to make changes make sure you have new 
 BP>kernel source version emerged first, so you always have one OLDer 
 BP>kernel that is unchanged and works


 BP> Regards Benny

 BP>... there can only be one way of life, and it works :)

 BP>-+- Msged/LNX 6.2.0 (Linux/3.17.7-gentoo (i686))
 BP> + Origin: duggi.junc.org where qico is waiting (2:230/0)


  Take care,
            Gert

      - Get the best with linux - 

--- Msged/LNX 6.2.0 (Linux/2.6.39-gentoo-r1 (x86_64))