On Feb 27, 9:53=A0am, "csa...{at}walla.com"

wrote:
> Hi,
> Don't know if anyone can help here but I got a 'new in box' still
> wrapped in plastic UDC card from ebay a while ago - recently opened
> the box and installed it in my IIe - unfortunately when I hit the
> power I get nothing from the IIe. =A0Switch the power off and I get a
> high pitched oscilation winding down from the power supply for a
> second or so. =A0Take the card out and the IIe starts up fine. =A0Try the
> card in the IIgs with the same results - something going on with the
> card and the power supply that stops the machine starting up. =A0Now
> very disappointed with my exciting new card. =A0Does anyone have any
> ideas what might be wrong, and if this can be fixed?
> Many thanks,
> Csabai

Sounds suspiciously like something is short circuited on the card.  :-
(

I recommend closely examining the card for anything obvious - like a
blob of solder where it shouldn't be, or a bent pin touching something
it shouldn't, the expansion slot connector looks normal and is fitting
into the slot cleanly. Also try disconnecting any drives and removing
all cables from the card to eliminate the possibility that something
is wrong there.

If that doesn't help, I'm sure someone with more hardware knowledge
than I will be able to provide more diagnostic advice.

Cheers,
Mike
--- SBBSecho 2.12-Win32