* Reply to message originally in area CarbonArea

Hello Maurice!

Sat Jan 03 2015, Maurice Kinal wrote to Gert Andersen:

 GA>> With linux to the pc. If it can get the router pc on the network
 GA>> and work for it and I will think to linux on harddisk.

 MK>That is the correct place for it.  Makes it much easier to configure on 
 MK>a read/write bootable device.

I found the first first December made linux sysrescuecd made at the 15.
December 2014 and then have a one there was made 2 days before New Year and the
latest is just gettng out of .iso this day. So I have 3 version of it now the
first is from August 2014, but as the time got to evening and time for drive
home to my girlfriend for the evening, I took a harddisk of 1.5tb out of my
fido3 pc where it got in to before Christmas when I put the other 1tb with the
latest made Gentoo system for router, this was 1.5TB harddisk had a older
kernel as not working well on it, this harddisk + the 2 December made
sysrecuecd and the latest mininal Gentoo install cdrom from 2014 took I with me
out and as I was knowning that my girlfriend had a complete new 64bit pc with
nothing on it as installed harddisk and is is like my router pc of hardware in
it for monitor and just a little ram of 512M or 1024M so I could work with
linux on it.
So now is I on to make a clean new Linux router install on this pc with router
and email server etc. on the 1.5tb harddisk by have the internet connected on
to this pc and another pc runnign window 7 and is online to www.gentoo.org and
have the Gentoo handbook visible while I installing linux on the 1.5TB
harddisk. Later on when I am finish with the installation and it got started up
as host without errors, can it be taken home and and replaced with the 1tb on
the 32bit router and mount to the 161G hd and worked on for setup for reboot to
use 64bit router run by the config files is been mofied and setup to work.
Then with carefully try to make a extra sync and emerge compile of the kernel
to be matching and see the hardware on the router pcs components.

If the latest sysrecuecd can and will work for emerge --sync + -e @world and
then recompile the kernel with to the 1tb boot part and put the source of
portage on to the 1tb root partion could it work that way bU for me sound it
like recompile the kernel when there is boot by the sysrecuecd will do it to
put the kernel on to the cdrom and do it bad.
So the best way is to recompile the kernel when it has working for python and
is boot by harddisk so it is been done on the harddisk.

  Take care,
            Gert

      - Get the best with linux - 

--- Msged/LNX 6.2.0 (Linux/2.6.39-gentoo-r1 (x86_64))