* Reply to message originally in area CarbonArea

Hello Russell!

Thu Oct 21 2010, Russell Tiedt wrote to Gert Koefoed Andersen:

 RT>>> It should be possible to configure makenl to produce pointlists
 RT>>> ... , unless I am mistaken ....

 GA>> Yes by a fake point network as use of numbers like 250150/1 as point
 GA>> use and host and net as 250150 but not sure if it work with use of
 GA>> BOSS:2:230/150 in line.

 GA>> Like :
 GA>> Boss:2:230/150
 GA>> ,1,system name,.......

 RT>=== Cut ===
 RT>;A Host Nodelist for Friday, January 3, 2003 -- Day number 003 : 22758
 RT>;A Copyright 2003, Baker's Acre, All rights reserved.
 RT>;A
 RT>;S
 RT>;S This file, if it exists in the MASTER directory, is copied to your
 RT>;S output file immediately following the header line.
 RT>;S
 RT>;S MakeNL treats this file in special ways.  When it is copied into 
 RT>your
 RT>;S output file, the first string of four pound-signs (#) it finds will
 RT>;S be replaced with the current year.  Also, to insure that the
 RT>;S difference file contains a copyright notice, the entire contents of
 RT>;S this file will appear as an "add" field in a difference file, 
 RT>WHETHER
 RT>;S OR NOT IT HAS CHANGED! (So keep it short!)
 RT>;S
 RT>;S The ";A" interest flag above is not required, but will
override the
 RT>;S default ";S" flag.  The former is interpreted by most nodelist
 RT>;S processors to mean "copy this comment to all output
files," while 
 RT>the
 RT>;S latter usually means "Sysop comment, don't copy to ourput lists, 
 RT>only
 RT>;S to comments file."  That's not usually the intent of a copyright
 RT>;S notice.
 RT>;S This file, if it exists in the MASTER directory, is copied to your
 RT>;S output file immediately following CPYRIGHT.TXT.  It may contain any
 RT>;S commentary you wish to place at the front of your list.
 RT>;S
 RT>;A You may optionally place ";" at
the beginning of
 RT>;A each line.
 RT>;S
 RT>;S Otherwise, MAKENL will insert ";S " at the beginning of
each line.
 RT>;S
 RT>;
 RT>Host,7105,OFS_Net,Bloemfontein,Russell_Tiedt,27-51-4476619,9600,V34,VFC
 RT>,V32t,V3
 RT> 2b,V42b,XA,CM
 RT>,1,Rusty's,Bloemfontein,Russell_Tiedt,27-51-4476619,9600,V34,VFC,V32t,V
 RT>32b,V42b
 RT> ,XA,CM
 RT>,1.1,Rusty's,Bloemfontein,Russell_Tiedt,27-51-4476619,9600,V34,VFC,V32t
 RT>,V32b,V4
 RT> 2b,XA,CM
 RT>;S This file, if it exists in the MASTER directory, is copied to your
 RT>;S output file after all data has been processed in a fashion identical
 RT>;S to PROLOG.TXT.
 RT>;S
 RT>;S It may contain any commentary you wish appended to the end of your
 RT>;S list.
 RT>;S
 RT>?
 RT>=== Cut ===

 RT>I have found this point list, I made some time ago, using makenl, 
 RT>unfortunately, I cannot locate the CTL file I used to build this, ...

 RT>I think, with the correctly modified, CTL file, it should be possible 
 RT>to make 
 RT>a BOSS style pointlist with makenl, tho I am no longer as certain, as I 
 RT>was a few days ago ...

 RT>It might require making a pointlist, as above, then manually editing 
 RT>HOST to 
 RT>BOSS and recalculating the CRC, and thus obtain a working BOSS style 
 RT>pointlist 
 RT>...

I normally for for Pascal-Net make a pointlist file there have some like
yor settings her in it.
Whre the first node line is Zone,115,.... and then the first Region of 100
and then 1000 to start with where RC1000 has a next line with point network
number by adding 000 for pointnet both I now like to make it better with
more useable lines for each node.
--- cut paspoint ---
Zone,115,Zone_coord_..................
Region,100,Central_USA_CANADA,....................
;
Region,1000,Central_USA,Windsor_NY,....................
;
Host,1000000,Central_USA,.................
Hold,1,Point_1_of_Central_USA,...............
;
Host.1502000,.................
Hold,1,Point_of_,,,,,,,,,,,,,
etc.

THen I no like it to only have Boss,115:1502/0 before the point instead of
Host so only the points line as ,1,... is in use and the boss line working
that way but I no see and know that neither RC/Region and Hosts /0 can have
point, it have to be only nodes there mst have point in a nodelist.
Paspoint nodelist is weekly been made together with the nodelists.

So for new working to make a pascal-net point list can I change things a
bite for it and let makenl starting make pplist with host lines and ,1, and
before pack to julian day have a kind og a perl file there change all host
word to Boss and update the recalculating crc.

  Take care,
            Gert

      - Get the best with linux - 

--- Msged/LNX 6.2.0 (Linux/2.6.33-gentoo-r2 (x86_64))