-=> Quoting Dave Beach to Hayes Support <=-
 DB> Further to a previous message I posted, I'm unhappy to report that,
Did you get my reply?  Sorry you're still having problems with:
 DB> problems reported previously with Zooms, where the Optima seems to want
 DB> to frequently connect at 300 bps, still continue.
Do you have an S register to control maximum symbol rate?  If so, try
setting it to 3200.  You'll still then have the possibility of a 28k8
connect (subject to line conditions)
 DB> This makes less and less sense.
It's because implimentation of V34 spec is up to individual manufacturers.
Early Zoom V34 did have a max symbol rate negotiation problem too (inbounds)
until it was fixed by ROM update.  Another example is USRs which, when the
2743 symbol rate is not shown as supported (calls from all Rockwell
chipset-ed units) will _always_ negotiate a max 3200.  (unless, like
Supra have done with their latest Flash code, -18, the max available
speed above 28k8 is projected in the INFo packet which then allows
33k6 connects)
Let us know how you get on?
rgdZ
Richard
--- FMail/386 1.02
---------------