* Reply to message originally in area CarbonArea

Hello Maxim!

Tue Oct 05 2010, Maxim Sokolsky wrote to Gert Koefoed Andersen:

 GA>> I make it work for hpt toss by deleting all setup for it on my my
 GA>> harddisks d: drive first and then make a clean new setup with change
 GA>> directories. del autoexec.bat *.bat (all the bat files there was in
 GA>> use and deleting some directories too. del d:\golded del d:\binkd del
 GA>> d:\point etc. for the one of my pont aka 150.150 so there was my to
 GA>> girls point system bacl as those was running fine with no errors. then
 GA>> make new \point directory for own use on usb and harddisk drive
 GA>> d: Made subdirectories in \point with \bin \binkd \golded \fido etc
 GA>> and some sub dirs in \fido and so. then copy .exe and dll files to
 GA>> \bin from fidoip and my golded files from another working point system
 GA>> and then make complete new config files for all working places. Made
 GA>> new autoexec.bat and bat files to use. Checked all through for where
 GA>> it have path for. Finally make a point.bat file to use in usb
 GA>> stick. All worked then on my XP 32bit, all got fine running here from
 GA>> first to last by usb stick. Then I got the stick out from XP32bit and
 GA>> put it on my protable Windows 7 64-bit pc. Run it by usb on 64bit
 GA>> protable, and hpt have no errors by unpacking zipped files and same
 GA>> for pkt/toss files, the bat file run fine just to it cd into \golded
 GA>> and was on to update 6 nodelist after that nltools nlupdate and uls
 GA>> has run. Then come w7 64 bit and gncyg errors in the file like hpt had
 GA>> done before, error in gncyg it self like some mem location by the file
 GA>> of been donne error with numbers poped up. I tried then to run gncyg
 GA>> without options and it was the same. Then tried to move the usb stick
 GA>> from w7 to XP portable 32.bit, and the same error come again, tried to
 GA>> use it on my XP work pc and it happen too here.

 MS>Strange, strange... As u see 
 MS>http://falcony.googlecode.com/files/nodelist.png nodelist complying 
 MS>works on my side on 64-bit Windows fine.

Yes it is strange when some other run of point test system runs fine on
same usb stick and it not do it on my 150.150
It coudl maybe be be the error now comes in reason of there is too much
nodelists to process and not disk space and mem to manage it by.
But on my sysop point system for node 2:230/152 a 152.1 is on another usb
stick, and here is there too about 8 nodelist to run compile on with gncyg,
and it go fine with that.

 GA>>>> All run fine until gncyg should start up with gncyg -c -f -d,
 GA>>>> and then error fron gncyg.

 MS>>> What kind error?

 GA>> Some error liek windows and gncyg not could find out to work together
 GA>> and could be first after that windows says that it not is a known
 GA>> program and then pop up with mem location error from the compiled
 GA>> gncyg.

 MS>Any printscreen avalaible? Application Log errors in Windows 
 MS>Administrative console?

 GA>>  It is only this copy of gncyg the give the error made maybe by
 GA>> that it coudl be to much or it to work with and not enough mem to work
 GA>> by.

 MS>Try ms visial c binaries. This is not critical matter if u go your 
 MS>problem aroud L)  Fresh binaries of ms vc u could grab here
 MS>http://fghi.pp.ru/golded/download.php

 MS>direct link
 MS>http://fghi.pp.ru/files/gedwin32-nsfv002-20090603.zip

 MS>Fetch also msvcr71.dll & msvcp71.dll files as it req. to run
 MS>http://fghi.pp.ru/golded/files/VS_2003.zip

 MS>>> I checked nodelist compily in fidoip... I have
 MS>>> \usr\bin\nodelist.bat, it generate nodelist, just simple line:
 MS>>> \usr\bin\gncyg.exe -C \usr\golded+\colded.cfg

 GA>> I tried to delete the copy I had in use and then copy the one from
 GA>> fidoid.. and it gave the same error.

 MS>Hm-m. As u see on uppest link I have no error during compliling 
 MS>nodelist under x64 on MS Windows with Cygwin binaries GoldED-NSF after 
 MS>fidoip package installation. Why it happens on your hw/configuration 
 MS>with same sw I have no idea. But if you describe your condition during 
 MS>this error happens in detail(with printscreen of errors and Apllication 
 MS>log inforamtion(if there is)) u could send your bug report directly to 
 MS>Konstantin Kuzlov(2:5019/40.1) Master.NoSFeRaTU [at] GMail.com
 MS>Or try to go aroung you promlem as I advise upper.


  Take care,
            Gert

      - Get the best with linux - 

--- Msged/LNX 6.2.0 (Linux/2.6.33-gentoo-r2 (x86_64))