Salud, Gert!

04 Oct 10 16:27, Gert Koefoed Andersen -> Maxim Sokolsky
area://fidosoft.husky?msgid=2:230/150+4caa0746:

 GA> I make it work for hpt toss by deleting all setup for it on my my
 GA> harddisks d: drive first and then make a clean new setup with change
 GA> directories. del autoexec.bat *.bat (all the bat files there was in
 GA> use and deleting some directories too. del d:\golded del d:\binkd del
 GA> d:\point etc. for the one of my pont aka 150.150 so there was my to
 GA> girls point system bacl as those was running fine with no errors. then
 GA> make new \point directory for own use on usb and harddisk drive
 GA> d: Made subdirectories in \point with \bin \binkd \golded \fido etc
 GA> and some sub dirs in \fido and so. then copy .exe and dll files to
 GA> \bin from fidoip and my golded files from another working point system
 GA> and then make complete new config files for all working places. Made
 GA> new autoexec.bat and bat files to use. Checked all through for where
 GA> it have path for. Finally make a point.bat file to use in usb
 GA> stick. All worked then on my XP 32bit, all got fine running here from
 GA> first to last by usb stick. Then I got the stick out from XP32bit and
 GA> put it on my protable Windows 7 64-bit pc. Run it by usb on 64bit
 GA> protable, and hpt have no errors by unpacking zipped files and same
 GA> for pkt/toss files, the bat file run fine just to it cd into \golded
 GA> and was on to update 6 nodelist after that nltools nlupdate and uls
 GA> has run. Then come w7 64 bit and gncyg errors in the file like hpt had
 GA> done before, error in gncyg it self like some mem location by the file
 GA> of been donne error with numbers poped up. I tried then to run gncyg
 GA> without options and it was the same. Then tried to move the usb stick
 GA> from w7 to XP portable 32.bit, and the same error come again, tried to
 GA> use it on my XP work pc and it happen too here.

Strange, strange... As u see
http://falcony.googlecode.com/files/nodelist.png nodelist complying works
on my side on 64-bit Windows fine.

 GA>>> All run fine until gncyg should start up with gncyg -c -f -d,
 GA>>> and then error fron gncyg.

 MS>> What kind error?

 GA> Some error liek windows and gncyg not could find out to work together
 GA> and could be first after that windows says that it not is a known
 GA> program and then pop up with mem location error from the compiled
 GA> gncyg.

Any printscreen avalaible? Application Log errors in Windows Administrative console?

 GA>  It is only this copy of gncyg the give the error made maybe by
 GA> that it coudl be to much or it to work with and not enough mem to work
 GA> by.

Try ms visial c binaries. This is not critical matter if u go your problem
aroud L)  Fresh binaries of ms vc u could grab here
http://fghi.pp.ru/golded/download.php

direct link
http://fghi.pp.ru/files/gedwin32-nsfv002-20090603.zip

Fetch also msvcr71.dll & msvcp71.dll files as it req. to run
http://fghi.pp.ru/golded/files/VS_2003.zip


 MS>> I checked nodelist compily in fidoip... I have
 MS>> \usr\bin\nodelist.bat, it generate nodelist, just simple line:
 MS>> \usr\bin\gncyg.exe -C \usr\golded+\colded.cfg

 GA> I tried to delete the copy I had in use and then copy the one from
 GA> fidoid.. and it gave the same error.

Hm-m. As u see on uppest link I have no error during compliling nodelist
under x64 on MS Windows with Cygwin binaries GoldED-NSF after fidoip
package installation. Why it happens on your hw/configuration with same sw
I have no idea. But if you describe your condition during this error
happens in detail(with printscreen of errors and Apllication log
inforamtion(if there is)) u could send your bug report directly to
Konstantin Kuzlov(2:5019/40.1) Master.NoSFeRaTU [at] GMail.com
Or try to go aroung you promlem as I advise upper.

Bst Rgrds, Maxim.

... Амарок не запущен или не играет
--- А жаль, что во времена неандертальцев не было фидонета