From: George KB2Z 
Subject: [drakelist] T-4x Carrier Osc, Filter Match, Bal. Mod Question


--=======9B31AA=======
Content-Type: text/plain; x-avg-checked=avg-ok-4D9CDE6; charset=us-ascii;
format=flowed
Content-Transfer-Encoding: 8bit

Good afternoon all,
I have a T-4x Carrier Osc, Filter Match, Bal. Mod Question.
On page 41, section B,  Carrier Osc, Filter Match, Bal. Mod., the 
instructions dont seem to work for me.

1 - Says to tune up normal. Put function to SSB & press PTT
2 -  Adjust carrier bal control to increase plate current.
3 -  Switch sideband switch from side to side and adjust balance.

My problem is that the car. bal set to the limit does not raise the current 
at all. It reads only the bias current in SSB with PTT pressed. This seems 
normal as there is no input into the mic., just PTT.
If I switch to CW  from SSB it shows a good increase, but only on the lower 
sideband. This seems  normal as well.

I think I'm following the manual to the letter, but I must be missing 
something.
Can anyone tell me what I'm doing wrong?

Thanks in advance, George, KB2Z

--=======9B31AA=======
Content-Type: text/plain; charset=us-ascii; x-avg=cert; x-avg-checked=avg-ok-4D9CDE6
Content-Disposition: inline


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.574 / Virus Database: 364 - Release Date: 1/29/04

--=======9B31AA=======--

----------------------------------------------------------------------
Submissions:        drakelist{at}www.zerobeat.net
Subscribe:          majordomo{at}www.zerobeat.net - subscribe drakelist in body
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---