From: George KB2Z 
Subject: [drakelist] T4X Plate Shaft Coupling


--=======26E4193C=======
Content-Type: text/plain; x-avg-checked=avg-ok-564536A1; charset=us-ascii;
format=flowed
Content-Transfer-Encoding: 8bit

Good Morning All,
Thanks for the reply's to my 12jb6 question.

I have another odd one? The tuning shaft couplers on  my T4X. They are 
1/2"+ wide, 2 metal inserts wrapped in a rubber sleeve.
I cant get the plate shaft coupler off without forcing the plate cap over 
abt 1/8". ( to clear the back of the rf slugs bracket ) It dont sound like 
a big deal but it twists the cap causing it to rack. The fins  touch from 
this forcing.
The pic in the manual shows the couplers as being, (nylon?), longer, 
narrower,  and running alongside the rf slugs bracket.
Would anyone have a coupler of the type shown in the manual pic? New or 
used would work equally well.

Thanks in advance for any info or suggestions, George KB2Z

--=======26E4193C=======--

----------------------------------------------------------------------
Submissions:        drakelist{at}www.zerobeat.net
Subscribe:          majordomo{at}www.zerobeat.net - subscribe drakelist in body
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---