CW>>> Is there anyone who has the same problem as mine?
 CW>>> My PB31's command$ can't work in the IDE environment.
[... ...]
 LS> Chinian is right, "COMMAND$" in the IDE does not work but it does
 LS> work once the program is compiled. I remember trying it with 3.0x and
 LS> just tried it again with 3.1 and still no go... I'm running under
 LS> OS/2 so that may have something to do with it not working for me.
  Yes it does. Tri it running PB31 in an real VDM, and you'll get it working 
right (at least this happened with PB3.0, I didn't tried it with the new 
version). It seems to be a problem with the MDOS or DOS kernel included with 
OS/2 ¨? I've found PB's IDE to be the first DOS program incompatible with the 
OS/2 DOS Box (-:
 LS> I do remember running under DOS 5 with 3.0x and it didn't work then
 LS> either.
  Well. It does work with DRDOS 6.0, Novell DOS 7.0 & PC DOS 7.0 if it helps.
 LS> The "COMMAND$" params can be set in the IDE  under the "RUN" pull
 LS> down-window. If there is something to set other then that, clue me in...
  This is the way that fails to work under the IDE.
    Rafa Gawenda
 267@usuari.os.2
--- > FEcho+ 1.41g & GED/2+ 2.50.b5
---------------