Hi Frank
 CJ>> LOAD NE2000 PORT=300 IRQ=3 name=board1 frame=Ethernet=II
 CJ>> (or Similar to that
 CJ>> Sintax)
 CJ>> BIND IPX TO board1 net=0000001
 CJ>> LOAD TCPIP rip=no forward=yes
 CJ>> BIND IP TO board1 addr=10.10.10.1 mask=255.255.255.0
 FR> You're using a class A addresses (10), but the subnet mask
 FR> from a class C address.
 FR> The correct class A netmask is 255.0.0.0.
Cheers.. That worked a treet!!!  How do I find out about valid subnet's
etc...
Craig
---
---------------