FR>  CS> Ok here's a picture of my LAN/WAN
FR> 
FR>  CS>   A ------Z---------X----------------- <---- This is our LAN in 
zusa
FR>  CS>                     |
FR>  CS>                     |
FR>  CS>                     |
FR>  CS>                     C <--- this is my wan, net 1FF
FR>  CS>                     |
FR>  CS>                     |
FR>  CS>                     |
FR>  CS>   B -------W--------Y----------------- <--- This is our 
FR>  CS> LAN in Beverly Hills
FR> 
FR> 
FR> What frame type are you using?  Your example shows Ethernet_802.3.  This 
is
FR> the default frame type for Netware 3.11.  However 3.12 and 4.x use
FR> Ethernet_802.2 as the default.
FR> 
Running frame type Ethernet_802.3 *EVERYWHERE*.
Except for the WAN link is HDLC.  If that makes a difference.
--- Renegade v5-11 Exp
---------------