Hello,   Peter!
 PK> The end result was the discovery that Warp Connect Blue box fails to
 PK> update ALL the files correctly if you ADD NETBIOS over TCP/IP to an
 PK> existing configuration.
 PK>  1. You MUST configure your adapater to support BOTH NETBIOS and
 PK> NETBIOS over TCP/IP using a second LEVEL of protocol on the SAME card
 PK> as TCP/IP.
 PK>       0 - IBM TCP/IP,
 PK>       0 - IBM NETBIOS
 PK>       1 - IBM NETBIOS over TCP/IP
Not for me.  I have TCPIP and Netbios over TCPIP on the same level, and the 
same card, and I can connect to a NT server.
The problem you had, happens sometime when you have Netbios, and you try to 
add Netbios over TcpIp on the same card.
I only had to use NET1 and NET2 in the IbmLan.ini once, when I had to handle 
2 lan cards using Warp Connect.
 bye/2,    Sandro
--- E-mail: gaspare@delenda.gvo.it ý
---------------