CS> Ok here's a picture of my LAN/WAN
 CS>   A ------Z---------X----------------- <---- This is our LAN in Azusa
 CS>                     |
 CS>                     |
 CS>                     |
 CS>                     C <--- this is my wan, net 1FF
 CS>                     |
 CS>                     |
 CS>                     |
 CS>   B -------W--------Y----------------- <--- This is our 
 CS> LAN in Beverly Hills
What frame type are you using?  Your example shows Ethernet_802.3.  This is 
the default frame type for Netware 3.11.  However 3.12 and 4.x use 
Ethernet_802.2 as the default.
NT can automatically bind to one frame type. If you have multiple frame types 
on the net, you must manually configure NT to see them.
Make sure you have the clients and servers setup to use the same frame types.
framse@goodyear.com; frank.ramsey@fallsbbs.com-CNE;CNA-4;MCP;MCPS;PE
--- EZPoint V2.2
---------------