CJ> Netware
 CJ> LOAD NE2000 PORT=300 IRQ=3 name=board1 frame=Ethernet=II 
 CJ> (or Similar to that
 CJ> Sintax)
 CJ> BIND IPX TO board1 net=0000001
 CJ> LOAD TCPIP rip=no forward=yes
 CJ> BIND IP TO board1 addr=10.10.10.1 mask=255.255.255.0
You're using a class A addresses (10), but the subnet mask from a class C 
address.  
The correct class A netmask is 255.0.0.0.  
Unless you're subnetting via netmask of course. 255.255.255.0 is an incorrect 
netmaks in either case.
To use 255.255.255.0, the first octet of the address must be in the range of 
192-223.
 CJ> Win95 (Control Panel/Network)
 CJ> Loaded Modules
 CJ> Client 32 for windows
 CJ> Novell IPX/SPX (Client 32)
 CJ> Microsoft TCPIP :- Address - 10.10.10.20 subnet - 255.255.255.0
Again, the netmask is wrong for the class A address you're using.
framse@goodyear.com; frank.ramsey@fallsbbs.com-CNE;CNA-4;MCP;MCPS;PE
--- EZPoint V2.2
---------------