On Thursday, May 9, 2019 at 3:21:11 AM UTC+1, fugee ohu wrote:
> On Wednesday, May 8, 2019 at 11:18:06 PM UTC+1, mm0fmf wrote:
> > On 08/05/2019 16:24, fugee ohu wrote:
> > > On Wednesday, May 8, 2019 at 11:07:44 AM UTC-4, Gordon Henderson wrote:
> > >> In article ,
> > >> fugee ohu  wrote:
> > >>> newest flashrom requires spi speed to be provided as an argument, what
value can I use with a pi zero w?
> > >>
> > >> Whatever your target device needs. Start with 1000000 (ie 1Mhz)
> > >>
> > >> -Gordon
> > >
> > > I've been getting a message ending in Read is not working on this chip
> > >
> > Well we're all bleedin' psychic here so you don't have to write that
> > error message out for us. We'll all just concentrate very hard and read
> > your mind.
>
> pi@raspberrypi:~ $ sudo flashrom -p linux_spi:dev=/dev/spidev0.0 -r
bad_flash.rom
> flashrom v0.9.9-r1954 on Linux 4.14.98+ (armv6l)
> flashrom is free software, get the source code at https://flashrom.org
>
> Calibrating delay loop... OK.
> Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi.
> ===
> This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to flashrom@flashrom.org if any of the above operations
> work correctly for you with this flash chip. Please include the flashrom log
> file for all operations you tested (see the man page for details), and
mention
> which mainboard or programmer you tested in the subject line.
> Thanks for your help!
> Read is not working on this chip. Aborting.

Just realized the error I just posted occurs when the clip isn't even connected
to the chip

--- SoupGate-Win32 v1.05