On Wednesday, May 8, 2019 at 11:18:06 PM UTC+1, mm0fmf wrote:
> On 08/05/2019 16:24, fugee ohu wrote:
> > On Wednesday, May 8, 2019 at 11:07:44 AM UTC-4, Gordon Henderson wrote:
> >> In article ,
> >> fugee ohu  wrote:
> >>> newest flashrom requires spi speed to be provided as an argument, what
value can I use with a pi zero w?
> >>
> >> Whatever your target device needs. Start with 1000000 (ie 1Mhz)
> >>
> >> -Gordon
> >
> > I've been getting a message ending in Read is not working on this chip
> >
> Well we're all bleedin' psychic here so you don't have to write that
> error message out for us. We'll all just concentrate very hard and read
> your mind.

pi@raspberrypi:~ $ sudo flashrom -p linux_spi:dev=/dev/spidev0.0 -r
bad_flash.rom
flashrom v0.9.9-r1954 on Linux 4.14.98+ (armv6l)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi.
===
This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash chip. Please include the flashrom log
file for all operations you tested (see the man page for details), and mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Read is not working on this chip. Aborting.

--- SoupGate-Win32 v1.05