Hi Frank
 > KR> How do you (easy, secure, unproblematic) transfer a Novell
 > KR> 3.12 to a New Machine ? (from 486/IDE/NE-2000 to Pentium/SCSI/3C5x9)
 > Run BINDFIX on the old server twice.
 > Install the new server.  Copy the NET$*.OLD files from old
 > SYS:SYSTEM to the new SYS:SYSTEM.  Run BINDREST.  This
 > transfers the accounts from the old to the new server.
 > Then replay your backup tapes to get the data back.
 >
 > You don't say why the new hardware.  If it's faster,
 > perhaps you could use the old disk drives and save yourself
 > lots of hassle.
Ok ! 486DX-33 pure ISA, 420 IDE mode 2 (Full :-)
Major parts of the machine are 5+ years old, CD-ROM is
Dual spin and is used heavily, 16MB RAM, 8 users
New = P200, 2940, 6.4GB 5400 RPM, 24*Spin CD, 96 MB RAM
Customer is NOT interested in reusing _ANY_ part of the old machine except 
for the software. Aaaand i have _never_ tried
to _MOVE_ a novell opsys before !
Thanx for the reply !
regards
Kristian Rask
 CDIY;CDITHW;CLBD
--- GEcho 1.02+
---------------