-=> On 16 Dec 96  06:30 you wrote to me <=-
 BA> designs, the low end dips and the revised recommendations for 
 BA> crossovers to woofers.  Your AL-IIIs are crossed over too low by
 BA> the  factory.  They never fixed the AL-IIIs despite acknowleging
        So, I should let the 10" woofer handle to 200Hz was it?
 BA> the  problem.  The Clearview was designed by a Carver engineer
 BA> (still  working there I'm told) and sold by him to DYI folks
 BA> working with the  60" ribbons.  Complete specs are on the Carver
 BA> DIY web page.  I suspect  it would work just fine with your
        Can you give me an exact address?  I'm having trouble finding
the page in question.
 BA> AL-IIIs if you used it in lieu of the  factory network.  Further
 BA> I'd be willing to bet that your low end  stressing of the shorter
 BA> ribbons would be completely solved as well.   If memory serves,
 BA> the Clearview goes for something in the $275 - 350  range mail
 BA> order direct only (no dealers).   Will see what Dan advises too.
        I need to know who to contact.  Does the clearview have more
than one high pass crossover on it?  I'll need one to keep the
subwoofer bass out of the 10" woofers and another to keep the bass out
of the ribbons.  I'm sure it has the ribbon high pass (to handle the
dip), but does it cover the bass driver too or will I need a 2nd
active crossover?
Thanks,
Gordon.
 * AmyBW v2.14 *
... 'Intel Inside' is a Government Warning Requied By Law.
--- FLAME v1.1
---------------