On 24/03/2019 The Natural Philosopher wrote:
> On 24/03/2019 08:33, Roby wrote:
>> I refer of course to the download speed zero Mbit/s of speedtest-cli and to
>> the errors 404 with the command 'sudo apt-get update' of my RPI3 installed
>> at 500 Km from where I live normally.
> Thes all point to some issue with networking, probably use of a transpernt
> (or in tusi cas nit so much)  proxy service by the mobile ISP
>
>
>> Thanks anyway to all those who tried to help me.
>>
>> Returning to technical problems: as soon as I go to the remote site, I
>> would try to move the RPI3 LAN cable to a 100 Mbps mini switch because it
>> is now connected to a TL-SG1008PE Gigabit PoE switch and one of the things
>> I did not understand is why the RPI3 which has a 100 Base Ethernet port
>> with the command 'sudo mii-tool' shows 'eth0: negotiated 1000baseT-HD
>> flow-control, link ok'
>
> You are, it seems, not alone:
>
> https://www.raspberrypi.org/forums/viewtopic.php?t=37854
>
>> This is likely a bug in mii-tool, nota probelm in networkong

Perfect !!! Even the mii-tool bug !!
Considering that I can't install other functions to manage eth0 the
mii-tool bug is perfect !!!. ;-)
Thanks anyway for letting me know ...

--
Roby

--- SoupGate-Win32 v1.05