DD> Questions:
 DD> 1) Is the dos system missing anything? Currently it is 
 DD> configured this way:
 DD> in autoexec.bat, it loads:
 DD> lsl.com
 DD> driver.com (driver of nic)
 DD> ipxodi.com
 DD> vlm
 DD> The net.cfg file specifies the correct irq and port being used (irq 15,
 DD> port addres 300)  and specifies the correct driver. The workstation NIC 
is
 DD> a DE -220 Series ISA Ethernet 16 bit NIC. (This is my 
 DD> second card, the other
 DD> one was a generic ethernet ne2000 compatable card too and it didn't work
 DD> either, giving me other but similar problems.
 DD> I gather that after I run "server" on the server and it is 
 DD> in console mode,
 DD> I am supposed to be able to boot up the workstation and chance to the 
"f:"
 DD> driver. It won't do this.
Actually, server starts the server but unless you've loaded the proper lan 
drive in AUTOEXEC.NCF, just starting the server does not start the LAN.
I assume you have tee's and terminators at each end of the thin net cable.  
And I assume you've specified the frame type to use.  Internetware defaults 
to 802.2.  If the workstation is trying to use a different frame type, it 
will never see the server.
Send me your autoexec.ncf from the server to one of my internet addresses.
framsey@goodyear.com; frank.ramsey@fallsbbs.com - CNE, CNA-4, PE
--- EZPoint V2.2
---------------