From: Bob W7AVK 
Subject: Re: [drakelist] TR-7 Board Extraction Tool

|                  
|      |             
|  
0                  
0  <---
--->     
----/  
<-- 2 3/4 in
------->             
--> 3/8
<--  
/-------------------\<---  
|                  
|     
|  
|   (top view)    
|    
3/8 in  
|                  
|     
|                         
<--- Match
the 2 3/4 in. dimension with the actual hole spacing of the boards. 
The wire really needs to be stiff, maybe from a heavy duty coat hanger. 
If you can bend it with a pliers, vice grip, etc., it's not heavy enough. 
Use a vise and a hammer. 
8-) Someone
else may have a better suggestion.Joe,
K9HDE PS 
My experience is that rocking the board back and forth (left/right) works
better that trying to pull the board directly (up) out of the
TR-7.




--------------6B852810C51CCBB36B6AC3F0
Content-Type: image/jpeg
Content-ID: 
Content-Transfer-Encoding: base64
Content-Disposition: inline; filename="C:\WINDOWS\TEMP\nsmail4F.jpeg"

/9j/4AAQSkZJRgABAQAAAQABAAD/2wBDAAgGBgcGBQgHBwcJCQgKDBQNDAsLDBkSEw8UHRof
Hh0aHBwgJC4nICIsIxwcKDcpLDAxNDQ0Hyc5PTgyPC4zNDL/2wBDAQkJCQwLDBgNDRgyIRwh
MjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjL/wAAR
CACNAVADASIAAhEBAxEB/8QAHwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAA
AgEDAwIEAwUFBAQAAAF9AQIDAAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkK
FhcYGRolJicoKSo0NTY3ODk6Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWG

---