In article ,
Adam Funk   wrote:
>I'm using a Pi 2B as a lightweight home office server.  The lshw
>output says size: 100Mbit/s and capacity: 100Mbit/s for the ethernet
>connection, & it's plugged into the router, which is plugged into the
>cable modem (both cables are fairly short).
>
>Are there other limitations on how fast the Pi can receive data that
>would explain lower than expected results from speedtest-cli?

You've not said what results you're getting....

My own tests with iperf on the early Pi's LAN to LAN showed that it could
almost saturate a 100Mb connection, but remember the Pi's Ethernet is
on USB which is half duplex only, so if downloading from the Interwebs
and storing to a file on a USB drive will give fairly meaningless results.

-Gordon

--- SoupGate-Win32 v1.05