From: Garey Barrell 
Subject: Re: [drakelist] R4A AGC inop.


George -

First off you must have a shorted plug in the MUTE jack on 
the rear panel for the NB and/or CAL positions to work.

For the AGC problem, first check the 12AV6 if you have the 
13 tube version.  What is the serial number of the receiver?

73, Garey - K4OAH
Atlanta


George wrote:
> Just bought an r4a and it seems like the agc is not working at all
> I have to ride the rf gain or I get way too much audio and distortion
> It has good sensitivity and is spot on frequency wise.
> 
> Also when I select NB or cal the s-meter pegs and I dont get any audio.
> 
> Thanks
> George NE2I
> 
> 
----------------------------------------------------------------------
Submissions:        drakelist{at}www.zerobeat.net
Subscribe:          majordomo{at}www.zerobeat.net - subscribe drakelist in body
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---