From: "Lee Bahr" 
Subject: Re: [drakelist] Removing the RF Gain Lever R-4C


No, the lever is soldered to a collar and the collar is pushed over the
shaft.  Pull on the lever without cocking it and it along with its collar
will pull off the shaft.
Lee, w0vt


----- Original Message ----- 
From: "Gene McCalmont" 
To: 
Sent: Saturday, May 15, 2004 3:30 PM
Subject: [drakelist] Removing the RF Gain Lever R-4C


>
> Does anyone have a favorite method for removing the RF gain lever from the
> Drake R-4C AF/RF gain assembly? I can see no other way to facilitate
removal
> of the front panel. I have searched the archives, the WB4HFN website and
> other sources finding little information. Obviously, the connection
appears
> soldered to the RF gain pot. Surely, I'm not the only one to have asked
this
> question.
>
> My sincerest thanks up front!
> Gene
>
> W5DDW
> Gene McCalmont
> 270 Oakridge Road
> Argyle Texas 76226
>
> ----------------------------------------------------------------------
> Submissions:        drakelist{at}www.zerobeat.net
> Subscribe:          majordomo{at}www.zerobeat.net - subscribe drakelist in
body
> Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in
body
> Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
> Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
> ----------------------------------------------------------------------


----------------------------------------------------------------------
Submissions:        drakelist{at}www.zerobeat.net
Subscribe:          majordomo{at}www.zerobeat.net - subscribe drakelist in body
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---