* EleBBS Support List

Mike Ehlert wrote:
> * EleBBS Support List
>
> Hi Phil,
>
>> Please correct me if I am outdated, but the only solution of
>> connecting a true DOS/BBS to a telnet connection is through RlFossil.
>> It has been a few years since I last played with it.
>
> If the DOS/BBS is actually running under Windows, then Net2BBS and
> NetFoss would work.   If its running under OS/2 then SIO could be used.
>
> But if its actually running under DOS, you could use RLFossil along
> with a
> packet driver... or as you mentioned below:
>
>> A more complexed solution will be through a serial port redirection
>> from a Win32/telnet connection redirecting the connection across the
>> serial port into the DOS/BBS box.
>
> This works well, but a seperate serial port is needed for each node, and
> you run into the problem that many doors will only support COM port
> values
> below either COM5 or COM10.
>
>> Has anyone experience with the DR-DOS TCP/IP package?
>
> Not me. :)
>
> Regards,  Mike
>
> _______________________________________________________________
>
> To unsubscribe write to "listbot{at}thebbs.org" and put the words
> "unsubscribe elebbs{at}thebbs.org" in the SUBJECT of the message.
> _______________________________________________________________
>
Hi i have installed RLFOSSIL and a PACKET driver which it needs for my
card but as soon as i load packet driver for my card my tcp/ip disables
(i have LanMan Configured).
This obviously means that i cannot connect via Telnet, any ideas?

Large
_______________________________________________________________

To unsubscribe write to "listbot{at}thebbs.org" and put the words
"unsubscribe elebbs{at}thebbs.org" in the SUBJECT of the message.
_______________________________________________________________

--- Internet Rex 2.29