Louis Aubree wrote to Gord Hannah on 12-06-1999

LA> 
LA> installed on HPFS, but I still don't understand the same for the
LA> _red_ spine version. 
LA> 
LA> I think that Warp _red_ spine has to be installed _after_ DOS and
LA> Win3.1x, on the same primary partition, so this partition has to
LA> be FAT16 formated. Then, the user could choose to never use Dual
LA> Boot anymore and run anything (hum!) from OS/2.  Where am I wrong?
LA> Is it possible to install Win3.1x _after_ Warp 3 red spine on an
LA> HPFS partition? Or use another trick?

Warp 3 Red has to be installed after Win 3.1: TRUE in most cases.  Win
3.1 can in fact reside on ANY fat-formatted  partition and there were
some people who claimed to have gotten it installed on HPFS - runs only
under OS/2 that way - and I recall seeing a way to add Win 3.1 after
OS/2 is installed but that is ancient history by now.

As for the rest, Warp 3 can be installed on ANY bootable partition.
FAT/ HPFS is not an installation determinant nor is the precise
partition.  The only requirement is that the partition containing Win
3.1 be accessible by OS/2.  This usually results in DOS/Win 3.1 on C:
FAT with OS/2 on D: or higher, preferably on HPFS.

Will Honea 
--- Maximus/2 2.02