>     Howdy Brian,
 >     Your welcome! As you know your not going to get enough
 > output gain
 > from the earphone speaker jack at all to be of any use unless
 > you also
 > ran the signal to an amplifier. This would be a bit crazy I
 > think! Its
 > probably much better to take the rig apart and tap in to
 > either the
 > electronics on the circuit board or right at the speaker
 > terminals!
 > heck if you take your rig apart you might as well get a 1/8
 > female
 > jack run the wires going to the speaker directly to the 1/8
 > female
 > jack so that when you plugged in a 1/8 inch male plug into
 > the 1/8
 > female jack it would cut off the out put to the internal
 > speaker and
 > when you unpluged it it would turn the speaker back on! This
 > is a
 > pretty simple wiring project. If you need help with it let me
 > know?
 >     73's de Reid,
Thanks again, Reid.  I'll check into this.  I am wondering if anyone has 
experimented with modiications for these Sangean/DX-XXX receivers.  It would 
be nice to find out what others have done along those lines.  By the way, in 
my original message, I mentioned 3.5 as the output from the mini-earphone 
jack.  That should have been followed by a zero with a vertical line through 
it.  I wasn't able to produce that symbol with the text here.  Happy 
Monitoring...Brian.
--- GEcho 1.00
---------------