On Wed, 06 Feb 2019 16:31:00 +1300
nospam.Mike.Powell@f1.n770.z6189.fidonet.org (Mike Powell) wrote:

>> The funny thing is, meanwhile I found a power supply which was part of a
>> "Raspberry 2 starter kit" from Vilros. This one delivers 5V and 2A also,
>> but in reality, there are 5.37 Volts without load, measured with the
>> device above.
>> Surprisingly RPi did not complain about "over voltage".
>
>I purchased my RPi2 from Vilros and have been using their included power
>supply with no issues for about 4 years now.  I was actually going to
>suggest that you check to see if you could get a PSU from them, or from
>Canakit.
>
>---
> * SLMR 2.1a

Not heard from the O/P for a while, and wondered if they'd actually got a
proper
voltmeter and checked the supply at the Pi itself.

Also, overvoltage off-load that high - although not right - is no real
indicator of what it would be on-load.

--
W J G

--- SoupGate-Win32 v1.05