From: Bob W7AVK 
Subject: Re: [drakelist] TR 7 Alignment


Bob W7AVK  made an utterence to the drakelist gang
----------------------------------------------------------------------
Mike - Two items before you start an alignment:

Make sure the 10 volt regulated is exactly 10.00.  Note this adjustment 
is near a couple others you don't want to mess with.  Read twice and 
adjust once.

Make sure the 40 Mhz oscillator is exactly 40.000 mhz.  As this is the 
master clock if the digital electronics is working, everything just 
falls into place.

Good luck

73  Bob  W7AVK
http://www.atnet.net/~rsrolfne - Extender Boards.

Mike Williams wrote:

> Any caveats when aligning a TR 7 using the Drake service manual procedures?
>  
> Thanks for any input,
>  
> Mike  AK7P

----------------------------------------------------------------------
On Behalf of Bob W7AVK 
Submissions:        drakelist{at}www.zerobeat.net
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Zerobeat Web Page:  http://www.zerobeat.net
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---