Alex, at 12:22 on Apr 14 1997, you wrote to All...
AM> I recently bought an internal modem without drivers, it's 
AM> model number is: GVC SF-1128HV/R9-P
Same as the KTX, I think.  Try http://edge.net.au for the *.inf file and the 
jumper information (the PCB's screen-printing should be adequate though).
AM> It has a Rockwell 28800 chipset on it. It has a few jumpers 
AM> on it, none of which are labelled and I cannot get Windows 
AM> 95 to locate it. Can anybody post some jumper combinations 
AM> to change the COM and IRQ setup on the modem, tell me a site 
AM> for where I can get drivers or help me in any other way?
Being a generic 28k8 Rockwell with EC, you should have no trouble installing 
it, but make sure you disable the relevant COM port in CMOS first, then 
install the port from "Add Hardware" (you're using a Pentium mobo, 
presumably)...
Regards, Bill
--- MsgedSQ/2 3.50
---------------