-=> Quoting Brian Johnson to Reid Kelly:  Subject RS DSP with Sangean<=- 
 -=>05-29-94  00:20<=- 
 BJ> Thanks for the tip, Reid.  The Sangean has external earphone jack
 BJ> only.  I believe it's only set for the mini-stereo headphones (3.5). 
 BJ> There would probably have to be a modification made to the speaker
 BJ> output in the radio itself.  Happy Monitoring...Brian. -!- GEcho 1.00
 BJ>  ! Origin: Gandalf's - San Diego, CA - USR DS - 619-466-9505
 BJ> (1:202/302)
    Howdy Brian,
    Your welcome! As you know your not going to get enough output gain
from the earphone speaker jack at all to be of any use unless you also
ran the signal to an amplifier. This would be a bit crazy I think! Its
probably much better to take the rig apart and tap in to either the
electronics on the circuit board or right at the speaker terminals!
heck if you take your rig apart you might as well get a 1/8 female
jack run the wires going to the speaker directly to the 1/8 female
jack so that when you plugged in a 1/8 inch male plug into the 1/8
female jack it would cut off the out put to the internal speaker and
when you unpluged it it would turn the speaker back on! This is a
pretty simple wiring project. If you need help with it let me know?
    73's de Reid,
... Where there's blue smoke, there's a Shortwave Radio Tech.
___ Blue Wave/QWK v2.12
--- Intermail/RA/SX/GE
(1:369/8)
---------------