From: Garey Barrell 
Subject: Re: [drakelist] R4C SSB filter install?


Garey Barrell  made an utterence to the drakelist gang
----------------------------------------------------------------------
George -

The filter socket below the chassis is for the AM filter, and is in 
circuit ONLY in AM mode.

The 1.5kHz filter is usually put into the topmost socket on the rear of 
the receiver, 500 Hz in the center, and 250 Hz on the lowest socket.  
Obviously they can be put anywhere, but this is the order that agrees 
with the front panel selectivity switch.

73, Garey - K4OAH
Atlanta

George Cortez wrote:

>
> George Cortez  made an utterence to the drakelist 
> gang
> ----------------------------------------------------------------------
> Hi All
> What is the preferred method for installing the 1.5kc filter in the R4C
>
> I assume its installed in the bottom of the rig?
>
> Thanks
>
> George Ne2I
>
----------------------------------------------------------------------
On Behalf of Garey Barrell 
Submissions:        drakelist{at}www.zerobeat.net
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Zerobeat Web Page:  http://www.zerobeat.net
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---