Hello Mark!

Dec 09 10:28 2018, mark lewis wrote to Markus Reschke:

 MR>> Putting on my software developer hat, I'm quite unhappy with such
 MR>> undocumented features.

 ml> what undocumented features? IIRC, binkd was the first to offer this
 ml> capability... you can easily list multiple semicolon separated 
 ml> domains in the NODE lines...

It seems that you have misunderstood me completely. I was not talking about
that nodes with multiple FQDNs aren't standard. We are discussing the way
multiple FQDNs are listed in the nodelist. Carol told me Z1 puts the FQDNs in
the IBN and INA flags, i.e. both should be used. The documented way is to use
either multiple INA flags or multiple IBN flags based on the specific
situation.

BTW, my tool follows the FTSC documented method, and if there are 20 INA flags
it will take all 20 addresses, same for IBN. But if there's an address in a IBN
flag that one prevails and the address from the INA flag is discarded.

ciao,
Markus

---