From: K9SQG{at}aol.com
Subject: Re: [drakelist] L4B


K9SQG{at}aol.com made an utterence to the drakelist gang
----------------------------------------------------------------------
Jack,

You can't get the amp into "complete standby".  Even in
"standby", the 
multimeter will read the plate voltage.

I believe you made a mistake with rewiring the "relays".  I
assume you meant 
that you changed the relay, there is only one however so I'm not sure what 
else was done.  There is no reason for changing the relay unless it was 
defective.  Aside from that, it is possible to change both the filament and plate 
transformer primaries between 110 and 220 v, but that doesn't affect the relay.

I've owned several L4Bs and have currently L7s, which are electrically almost 
identical.  I'd be happy to help in any way I can.

73s,

Evan
----------------------------------------------------------------------
On Behalf of K9SQG{at}aol.com
Submissions:        drakelist{at}www.zerobeat.net
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Zerobeat Web Page:  http://www.zerobeat.net
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---