--> Roy Lowery Quotes a message written by Larry Hawks
--> to Roy Lowery on 08-07-95 17:17 saying:
LH> RL>You should be able to reverse the wiring on the plug end of
LH>  
LH> RL>servo if there is no reverse switch on the tx.
LH>  
LH> RL>--- RoboBOARD/FX v6.3
LH>  
LH>  
LH> TIME OUT
LH> If you are trying to reverse servo direction, swaping POS and 
LH> at the servo plug is a sure way to cook a servo.  That voltage
LH> circut board in the servo and for some unknown reason reversed
LH> is sudden death.  Alas all is not lost...  To reverse the serv
LH> have to swap the POS and NEG wires on the servo motor, AND swa
LH> and NEG wires on the feed back pot.
LH>  
LH> Goood Luck, and I hope this isn't too late
LH>  
LH> Larry
LH> ***
LH>  
 OLX 2.1 
 It's only a hobby ... only a hobby ... only a
LH> 
LH> I have three servos that I have switched the wires on the plugs and they 
have been going strong for 7 months now.
 
--- RoboBOARD/FX v6.3
---------------