From: "Lee Bahr" 
Subject: Fw: [drakelist] L4B vox relay connector


"Lee Bahr"  made an utterence to
the drakelist gang
----------------------------------------------------------------------
Why don't you do the mod as Drake came up with for their customers many
years ago and has been outlined on this reflector before?  Once the mod is
made, you can use regular audio line cords with a RCA plug attached on one
end.

All you have to do is remove the old 2-pin jack, replace it with a small
rectangle piece of  aluminum with a hole drilled into it to hold a RCA jack.
Then using the same mounting screws as held the 2-pin jack,  mount the new
piece of aluminum.  Then place a RCA jack into the newly installed aluminum
plate.  Wire up the new RCA jack.  Now you can use a wire line cord fitted
with a RCA plug to go between your amp and radio.  No more problem and you
have now done an authorized Drake factory mod.  The job looks professional
and the power supply looks like it came from the factory that way.

I got this mod from Drake as a kit many years ago.  Why would anyone have a
problem with an authorized DRAKE kit/mod?

Lee, w0vt
Houston


----------------------------------------------------------------------
On Behalf of "Lee Bahr" 
Submissions:        drakelist{at}www.zerobeat.net
Unsubscribe:        majordomo{at}www.zerobeat.net - unsubscribe drakelist in body
Hopelessly Lost:    majordomo{at}www.zerobeat.net - help in body of message
Zerobeat Web Page:  http://www.zerobeat.net
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

---