-=> Quoting Richard Town to All <=-
 RT> Hi All...
 RT> Anyone recognise this network card?
 RT> WD8013EBT 16-bit edge with 15 way connector and BNC
 RT> Jumpers are for AUI (what is this?) and thin ethernet
 RT> with an IRQ jumper tag 3 4 5 7 2/9 10 11 15
 RT> A ROM jumper 16K 32K 64K NONE, an address jumper
 RT> C4000 C8000 D0000 with a ROM size jumper (but no
 RT> ROM chip)
 RT> It has a network address sticker with 0000C0 7F1307
 RT> I've not done any LAN before so what are the 15-way
 RT> connector pinouts?  Can this be used as a domestic
 RT> LAN card with WfWg3.11?
 RT> With thanx from a LAN newbie for any reply...
 RT> Later,
 RT> Well, WfWG detects this as a SMC EtherCard Plus 16 with Boot ROM
 RT> So guess primary info wanted is:  can this card be used with a
 RT> "standard" LAN setup using the 15 way AUI connector (and 'spose a
 RT> termination is required on the BNC)?
        Unless you are going for really long runs, AUI is not very useful
for the normal environment. Use the BNC. I have one of these cards and it
works very well. 
 RT> Incidentally, doing what I thought was an install with this card,
 RT> base memory address D0000 with base I/O port 280 IRQ10, Syschk does
 RT> detect alright at the correct IRQ but MSD not.
        Don't worry about it. TTYL
___ Blue Wave/386 v2.30
--- Platinum Xpress/Win/Wildcat5! v2.0
---------------