Hi All...
Anyone recognise this network card?
WD8013EBT 16-bit edge with 15 way connector and BNC
Jumpers are for AUI (what is this?) and thin ethernet
with an IRQ jumper tag 3 4 5 7 2/9 10 11 15
A ROM jumper 16K 32K 64K NONE, an address jumper
C4000 C8000 D0000 with a ROM size jumper (but no
ROM chip)
It has a network address sticker with 0000C0 7F1307
I've not done any LAN before so what are the 15-way
connector pinouts?  Can this be used as a domestic
LAN card with WfWg3.11?
With thanx from a LAN newbie for any reply...
Later,
Well, WfWG detects this as a SMC EtherCard Plus 16 with Boot ROM
So guess primary info wanted is:  can this card be used with a
"standard" LAN setup using the 15 way AUI connector (and 'spose a
termination is required on the BNC)?
Incidentally, doing what I thought was an install with this card,
base memory address D0000 with base I/O port 280 IRQ10, Syschk does
detect alright at the correct IRQ but MSD not.
rgdZ
Richard
--- FMail/386 1.02
---------------